INK London adds water decals to Additions range

Add a splash of art to your INK London services with the Additions Decals.

The limited-edition decals are available in 15 styles in a range of designs.

How to use:
1. A white base colour recommended. Cut out the decal using scissors.
2. Dip the decal in water for 10-15 seconds.
3. Slide the decal off the backing paper.
4. Place the decal onto your cured gel polish colour (removal of inhibition layer is optional)
5. Dab off excess water. If required with a lint free wipe, making sure there are no air bubbles under the decal.
6. Allow to dry.
7. Optional: You can use a coat of 007 Primer over the decal to make the top of the decal sticky.
8. Double topcoat the entire nail to seal. Optional: use a coat of Base Elevation or Clear Flubber over the design and top coat as normal, making sure you full cap the free edge with each coat
9. For full coverage decals, gently use a 240 grit file to file the excess decal away from the free edge. Do this in a downward motion to avoid lifting the decal from the nail
10. Use a small brush dampened with Pre Nail Prep to brush away any excess decal from the sidewalls or cuticle area. Seal as above.

The decals are available now via www.inknails.com